Coilover Kia Stinger CK (17~) Drag Racing. This version is suitable for drag race.
There are different wheel drive ways for different vehicles, 2WD and 4WD, the coilover setting will be different.
Top Mount
Front: Strengthen NR rubber and ultra pressure resistant iron sheet (SS41), come with the bearing. (TU).
Rear: OEM
Front Spring
Diameter: 12,5mm
Length: 160mm
Rate: 8,5(OD:107)kg
Rear Spring
Diameter: 14,3mm
Length: 275mm
Rate: 10(62.5/85)kg
To adjust the bottom mount to reach the ride height desired and no need to compress the sping then
causes unnecessary bounce.
32 different damping settings are able to response the varieties of road conditions, mode, tires and HP.
Wishbone design made up of aluminum material to reduce ride height adjustable is avoided to compress and
the weight of vehicle.
Our design is oil and gas separately for monotube. There are diameter 44mm pistons in the strut which can contain
large amount volume of shock oil for handling everlastingly and prevent the shocks from exhaustion after long-term
use and absorb the bumps caused by the uneven roads.
Each of our versions use the highest density foam for buffing, is not use general rubber.
Because the foam have the highest density space, which absorb the huge compression force.
Even if the cost of the foam is higher than rubber, we adhere to offer the best quality at the lower cost.
Monotube design is adopted for this coilover system as it can retain stable damping. We use standard coilover oil
(IP shock absorber oil) with the leading brand of Japanese NOK oil seal. The spring is manufactured by the high
specification SAE9254 material with A6061 aluminum combating extreme weather to avoid the rusty when
it snows or rains.
McPherson coilover can choice 3D pillowball top mount, is able to adjust the camber and caster for adjust
to the optimal angle.
The "model year" defined for each application on our website might be different from the ones in each country;
therefore, please confirm the "production years" with us if you cannot make sure.
Coilover Kia Stinger CK (17~) Drag Racing
- Brand: Border Racing
- Product Code: KI10-01-A1-DR
- Availability: In Stock
-
$1,220.00
Related Products
Front Lower Bar Kia Stinger 2WD
Front Lower Bar / Front Member Brace for Kia Stinger 2WD improve your car Handling & Stability.The f..
$191.00
Rear Lower Bar Kia Stinger
Rear Lower Bar / Rear Member Brace for Kia Stinger improve your car Handling & Stability.The forces ..
$138.00
Rear Lower Bar Kia Stinger
Rear Lower Bar / Rear Member Brace for Kia Stinger improve your car Handling & Stability.The forces ..
$179.00
Front Lower Bar Kia Stinger AWD
Front Lower Bar / Front Member Brace for Kia Stinger AWD improve your car Handling & Stability.The f..
$186.00
Front Anti-roll Bar Kia Stinger
Front Anti-roll Bar / Front Sway Bar / Front Stabilizer Bar for Kia Stinger improve your car Handlin..
$281.00
Sway Bar Kia Stinger Rear
Sway Bar Kia Stinger improve your car Handling & Stability. Also known as a Rear Anti-Roll Bar, Rear..
$252.00
Coilovers Kia Stinger CK (17~) Street
Coilovers Kia Stinger CK (17~) Street for Daily Driving. 32-way damping setting is able to adjust th..
$1,170.00
Coilover Kia Stinger CK (17~) Sport
Coilover Kia Stinger CK (17~) Sport. By increasing 35% damping and spring rate setting, it is suitab..
$1,260.00
Coilover Kia Stinger CK (17~) Asphalt Rally
Coilover Kia Stinger CK (17~) Asphalt Rally. This coilover kit is specially made for rally asphalt. ..
$1,300.00
Coilover Kia Stinger CK (17~) Racing
Coilover Kia Stinger CK (17~) Racing. This kit is only used for circuit. BORDER have many experience..
$1,300.00
Big Brake Kit KIA Stinger (CK) 17~UP
D2 Racing Sport is a leading manufacturer of high performance brake system, founded in 1991 and one ..
$3,400.00